Bakin Karfe In-Balo Thermostatic 3-aiki Shawa Daidaitawa/Kit
Ƙayyadaddun bayanai
| Babban shawa | SS, L500 × W200mm, 4 ayyuka (ruwan sama, hazo, ruwa shafi, waterfall) |
| Mixer | tagulla, thermostatic 3-aiki, 4-motsi mai karkatarwa, tare da akwatin filastik.2mm kauri SS farantin. |
| Bakin shawa tare da fita | tagulla |
| Shawan hannu | tagulla |
| Bayani na CST30001 | tagulla, mai juyawa |
| Motsi mai sassauƙa | 1.5m PVC |
Cikakkun bayanai
Amfanin Samfur
1. Saitin kayan wanka na cikin bango yana tare da ƙarewar chromed.
2. Akwai launuka daban-daban don masu amfani don zaɓar don biyan buƙatu na musamman.
3. Thermostatic 3-aiki mahautsini an saka a gaban gini da kuma tare da daya-key maida na daban-daban ayyuka.
4. Yana da daidai kuma daidaitaccen kula da zafin jiki kuma yana hana bambancin zafi da sanyi.
5. bangon da aka rataye saman ruwan shawa yana gyarawa tare da ayyuka hudu - ruwan sama mai fesa, hazo, ginshiƙin ruwa da ruwa.
6. Ɗayan hanyar ruwa ta hanyar ruwa ta gane ayyuka hudu a cikin babban shawa, rage farashin aiki.
7. Za'a iya shigar da madaidaicin spout, madaidaicin shawa tare da shawa da shawan hannu daban-daban bisa ga al'adar masu amfani.
Tsarin samarwa
Jiki:
Zaɓin babban farantin karfe ==> yankan Laser ==> babban yankan Laser yankan ==> lankwasawa ==> nika mai kyau ==> ƙonawa mai kyau ==> zanen / electroplating ==> taro ==> gwajin hanyar ruwa mai zurfi ==> high da gwajin aikin ƙarancin zafin jiki ==> cikakken gwajin ayyuka ==> tsaftacewa da dubawa ==> dubawa gabaɗaya ==> marufi
Babban Sassan:
Zaɓin Brass ==> yankan mai ladabi ==> babban madaidaicin aikin CNC ==> polishing mai kyau ==> zanen / ci gaba da lantarki ==> dubawa ==> sassan da aka kammala don ajiya mai jiran
Hankali
1. Wasu daga cikin sassan an tattara su daban-daban (kamar babban shawa, shawan hannu da sauransu), don haka masu siye suna buƙatar shigar da su wani ɓangare.Da fatan za a karanta umarnin shigarwa kafin sakawa don guje wa ɓarna a cikin tsari kuma ya shafi bayyanar gaba ɗaya, kuma kula da hatimin sassan haɗin hanyar ruwa masu dacewa.
2. A lokacin shigarwa na farko, kula da hatimin ɓangarorin haɗin hanyoyin ruwa masu dacewa, da daidaiton shigar da bututun ruwan zafi da sanyi da sauran hanyoyin ruwa masu aiki.Karanta bayanin a hankali.
3. Lokacin da aka kammala aikin gina magudanar ruwa a cikin bango, kuma bayan tsaftace najasa, ana gudanar da gwajin rufe hanyar ruwa gabaɗaya da gwaje-gwajen aikin da suka danganci aikin don tabbatar da cewa hanyar ruwa ta rufe sosai kuma aikin yana daidai.
4. Lokacin amfani da wannan samfur, bai kamata a taɓa saman ta kayan lalata ba kuma yakamata a guji bugun abubuwa masu kaifi don kula da bayyanar gaba ɗaya.
5. Kula da tsabtace hanyoyin ruwa, don kada a toshe bututun da kuma nonon silicone.
6: Idan an toshe nonon siliki ko kuma ruwan ruwan ya karkace bayan an daɗe ana amfani da shi, da fatan za a yi amfani da takardar filastik mai ƙarfi don matsewa da goge saman ƙasa kaɗan don tsaftace ma'aunin da bai dace ba da ke manne da kuma kewayen ramin.idan akwai toshewar da ba za a iya cirewa ba, zaku iya amfani da goge ko alluran tsalle na filastik tare da diamita waɗanda ba su fi girma ramin fitarwa ba don tsaftacewa da yin aikin hanyar ruwa na al'ada.
Ƙarfin masana'anta
Takaddun shaida
